![]() How to connect an external display to my laptop.If the external display works fine, it's an issue with your laptop LCD screen or the connection from the motherboard to the LCD screen. Verify there is no issue with the laptop graphics card by connecting a monitor or another external display to the laptop. To access the secondary screen toggle action on the function keys, you likely need to press the Fn key and then press the appropriate function key. Below are two examples of what the function key with screen toggle may look like on your laptop. Pressing that key may fix the issue, telling the laptop to display an image on the laptop screen and the external screen. Most laptops have a function key with a secondary action that toggles where and how the laptop displays an image. The default action on some laptops is to display an image only on an external screen if connected. If you have an external display connected to your laptop, like a computer monitor, the laptop screen may not display anything. How do I adjust my brightness or contrast on my laptop?Įxternal display screen Connected external display.Next, try increasing the brightness on your laptop to verify that it is not causing your issue. Make sure your laptop is not in a power-saving mode by plugging the laptop into the wall. If the picture is partially visible, the laptop's brightness is too low or turned down by a power setting. How to erase my hard drive and start over.If the problem persists, erase your hard drive and reinstall Windows. Restart Windows to see if it's a temporary issue and resolves itself with a reboot. One of the main causes for this issue is a corrupt system file preventing the operating system from loading, resulting in a black or blank screen. If the computer boots up but the screen goes black or blank after logging in, there may be an issue with the operating system.Īn indication of the operating system not loading properly and being at fault is if you can see the mouse cursor on the screen and nothing else. ![]() ![]() Review the following page if the laptop does not turn on or boot up. If the laptop starts up but nothing is displayed on the screen, continue with the troubleshooting steps below. Press the power button to see if the laptop turns on and displays anything on the screen.Connect the power adapter to the laptop again.Press and hold the laptop power button for 10 seconds to discharge any stored power.How do I remove the battery from my laptop computer?.Disconnect the power adapter from the laptop.Try the following steps to rule out a possible battery issue. Even if you can charge it to full capacity, the battery may have a defect causing it to interfere with the laptop start-up process. Therefore this suggestion should only be followed for laptops with a traditional hard drive.Ī laptop battery may cause problems with booting and displaying anything on the screen. Newer computers with an SSD and no other drives can be silent even during a normal boot.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |